Cat5 Network/Telephone Cable Tester VER 1.0
Discontinued Product
This SimpleViewer gallery requires Macromedia Flash. Please open this post in your browser or get Macromedia Flash here.
This is a WPSimpleViewerGallery
This is a WPSimpleViewerGallery
Product Features
This unit test CAT5 or CAT5E cable for connection. Connect one end of the cable into the master unit, connect the other end of the cable into the remote unit. Turn on the master unit. Master begins sending strobe signals on each pin of the cable connected. When the master unit sends a signal on Pin 1, the remote unit should respond by lighting up Pin 1. This indicates a correct connection of your cable.
Requires a 9V Battery for operation.
- Check continuity
- Check crossed pairs
- Check pinouts
- Checks RJ-45 or RJ-11 Cables
- Order Number: tester_cat5
Manuals
> Manual
pdf
Wiring: Patch Cable
| RJ-45 pin (End A) | Cat5 conductor | RJ-45 pin (End B) |
| 1 | Orange/White | 1 |
| 2 | Orange | 2 |
| 3 | Green/White | 3 |
| 4 | Blue | 4 |
| 5 | Blue/White | 5 |
| 6 | Green | 6 |
| 7 | Brown/White | 7 |
| 8 | Brown | 8 |
Wiring: Cross-Over Cable
| RJ-45 pin (End A) | Cat5 conductor | RJ-45 pin (End B) |
| 1 | Orange/White | 3 |
| 2 | Orange | 6 |
| 3 | Green/White | 1 |
| 4 | Blue | 4 |
| 5 | Blue/White | 5 |
| 6 | Green | 2 |
| 7 | Brown/White | 7 |
| 8 | Brown | 8 |
